Days 2 Thru 4 - Continue Boundary Awareness - Petsafe PIG20-11041 Gebrauchsanweisung

Steps:
1. Begin by walking your pet on a lead in the Pet Area. Calmly praise and talk to your pet.
2. Move toward the Boundary Flags (10A). Keep your mood happy.
3. With full control of your pet on a lead, walk to the fl ags. As your pet enters the Static Stimulation Zone, the Receiver Collar
will begin to beep (10B). Allow your pet to stay in the Static Stimulation Zone for up to 2 seconds then gently help him back
into the Pet Area (10C). Immediately praise and offer your pet a treat as he enters the Pet Area, even if you have helped with
the lead.
4. Repeat this process at the same Boundary Flag until your pet resists going into the Static Stimulation Zone.
5. Aim to master 3 to 4 Boundary Flags per session. Make this FUN! Praise if your pet quickly retreats or resists going into the
Static Stimulation Zone.
10A
PHASE 2
Days 2 thru 4 - Continue Boundary
Awareness
Perform three training sessions per day, each lasting 10 to 15 minutes.
Goal:
To train your pet to stay in the Pet Area and respect the boundary.
Setup:
Program the Static Stimulation Level on the Receiver Collar to Level 2.
Put a separate non-metallic collar on your pet's neck ABOVE the Receiver Collar and attach a lead.
Be sure the extra collar does not put pressure on the Contact Points.
Have tiny pieces of treats available.
Have your pet's favourite play toy available.
Steps:
1. Repeat steps 1 thru 5 in Phase One.
2. If your pet does not respond to the Static Stimulation, confi rm that the Receiver Collar is fi tting properly according to Step 9
on page 16.
3. If the Receiver Collar is fi tted properly and your pet does not respond to the Static Stimulation, increase the Static Stimulation
Level by 1. Watch for slight reactions at fi rst such as ears up, head turned, looking at the ground.
4. Stay at the same fl ag until your pet resists going into the Static Stimulation Zone.
10B
www.petsafe.net
10C
19