Output Tray - Brother HL-2070N Installationsanleitung

4.1.3. Output tray

Esc&l#G (27)(38)(108)#(71)
# denotes the output tray.
Select the printer output tray.
1:
Select #1 bin.
3:
Select #2 bin.
4:
5: Select #3 bin.
6: Select #4 bin.
Select #5 bin.
7:
Select #6 bin.
8:
Select #7 bin.
9:
10: Select #8 bin.
11: Select #9 bin.
Select #10 bin.
12:
100: Select the finisher tray (HL-3260N)
 This command selects the specified output tray.
 This command is ignored when the specified tray is not available.
 The PJL OUTBIN command is ignored when this command is executed.
 If the printer has data to print when this command is executed, the command is valid from the next page
immediately after the data is printed.
<1Bh><26h><6Ch>#<47h>
(CT:HL-8050N)
CHAPTER 2 PCL - 19