Detailed Information; Details On The Specifications; Usable Emulation; About Tray Selection - Brother HL-2070N Installationsanleitung

3.

DETAILED INFORMATION

3.1.

Details on the specifications

3.1.1.
Only the PCL emulation can be used since the macro is supported only on the PCL emulation. For
the request to use the EPSON / IBM emulation, however, the filter function which converts the
EPSON / IBM emulation data to the PCL emulation one is provided.
3.1.2.
When the carbon copy function is enabled, the normal tray selection function is ignored, and the
carbon copy function takes priority (excluding the PRIORITY command).
3.1.3.
When the carbon copy function is enabled, the duplex printing function cannot be used.
(The duplex setting is ignored both on the control panel and with the PJL command.)
3.1.4.
Since the user defined size paper is often used with the carbon copy function, it can be fed from the
Tray 1 and Tray 2. However, the paper which cannot be fed from the selected tray is not supported.
(Ex. A6 size or others with the Tray 2)
3.1.5.
When the carbon copy function is enabled, the reprint function cannot be used.
3.1.6.
The carbon copy function cannot be used even if the function is turned on for the spool data.
3.2.

Limited items

3.2.1.
When the print data is two or more pages, it is required to insert the FORM FEED command (<FF>)
or RESET command (<ESC>E) into the page break.
For the print data which breaks a page only with the form feed code, the problem that the macro
cannot be added correctly, or that the data is not printed in the correct order will occur since the page
break is not known.
3.2.2.
If the <ESC><CR> command is sent when the carbon copy function is enabled, the printer stops the
carbon copy process and disables the carbon copy function when it recognizes the <ESC><CR>
command.
While the filter program is being operated, the printer does not stop the process and disable the
carbon copy function.

Usable emulation

About tray selection

Ignored tray command SOURCE, MP FIRST, MP SIZE, MANUAL FEED,TRAY1 SIZE,
TRAY2 SIZE, *TRAY3 SIZE, DUPLEX
*Only HL-5270DN/5280DW/5380DN
Valid tray command PRIORITY

About the duplex setting

About the USER DEFINED SIZE paper

About the reprint function

About the spool data

About the page break of the print data

About the <ESC><CR> command of the print data
CHAPTER 10 CARBON COPY FUNCTION - 8