Esc = Set Data Msb To; Esc; Cancel Msb Setting; Select Near Letter Quality Or Draft - Brother HL-2070N Installationsanleitung

Set data MSB to 0

Esc=

(27)(61)
 This command enables you to set the most significant bit of incoming data bytes to 0.
 This command does not affect data comprising a graphics image or data that defines a downloadable
character.
LPRINT CHR$(27); CHR$(61); 'Set MSB to 0
Set data MSB to 1
Esc> (27)(62)
 This command enables you to set the most significant bit of incoming data bytes to 1.
 This command does not affect data comprising a graphics image or data that defines a downloadable
character.
LPRINT CHR$(27); CHR$(62); 'Set MSB to 1

Cancel MSB setting

Esc# (27)(35)
This command cancels the two commands that set the most significant bit of incoming data bytes (Esc =
and Esc >).
LPRINT CHR$(27); CHR$(35); 'Cancel MSB setting

Select Near Letter Quality or Draft

Escxn (27)(120)n
The printer ignores this command.

Select / cancel half speed mode

Escsn (27)(115)n
The printer ignores this command.

Enable printer

DC1 (17)
The printer ignores this command.

Disable printer

DC3 (19)
The printer ignores this command.

Initialize printer

Esc@ (27)(64)
 This command resets the printer.
 All remaining data is printed out and the printer default settings are restored.
LPRINT CHR$(27); CHR$(64); 'Printer reset
<1Bh><3Dh>
<1Bh><3Eh>
<1Bh><23h>
<1Bh><78h>n
<1Bh><73h>n
<11h>
<13h>
<1Bh><40h>
CHAPTER 6 EPSON - 11