Pjl Job Offset On/Off; Ps Job Offset On/Off; Pcl Job Separate (Esc&L1T) Command - Brother HL-2070N Installationsanleitung

3.1.6. PJL job offset on/off

Format
@PJL SET/DEFAULT JOBOFFSET=ON/OFF
Parameter
Paper is ejected offset by each job.
ON:

OFF: Paper is ejected together.

Default = ON
Explanation
 This command selects the job offset.
 This command is ignored when the Finisher/Stapler unit is not available.
 The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.7. PS job offset on/off

Command
Parameter
bool
Paper is ejected offset by each job.
True:

Paper is ejected together.
False:

Default = false
Explanation
 This command selects the job off set.
 This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<<BRjoboffset true>>setpagedevice
3.1.8. PCL job separate (Esc&l1T)
Command
Esc&l1T (27)(38)(108)(49)(84)
Explanation
 This command separates the job.
 This command is ignored when the Finisher/Stapler unit is not available.
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 6
<1Bh><26h><6ch><31h><54h>