Function Description Of The Monitor - Waeco PerfectView CRT100 Montage- Und Bedienungsanleitung

Function description of the camera RV-20 (RV-100)
(see D 1)
1 Camera protection
2 6-pole connecting cable
3 Camera with automatic protection shield
4 Camera holder
Function description of the camera RV-22 (RV-200)
(see D 2)
1 Camera
2 6-pole connecting cable
3 Camera holder

Function description of the monitor

Front panel (see E)
1 On/off switch (
2 Control lamp lights up when the monitor is switched on
3 Contrast adjustment
4 Brightness adjustment
5 Camera selection switch; reversing switch between camera 1 and camera 2
(accessory)
6 Reversing switch – AUTO/MANUAL
= AUTO, monitor switches on automatically when inserting
the reverse gear. RV-100 The protection shield of the camera must
move up now.
= MANUAL, monitor is switched on or off via
On-/Off-switch (1). RV-100 The protection shield of the camera must
move up or move down now.
7 Brightness reversing-switch day/night
= DAY,
Rear panel (see E)
8 5-pole plug-in connection (input) for camera 1
9 5-pole plug-in connection (input) for camera 2 (accessory)
10 Selector switch for camera 1 and 2 in order to present the image on the monitor
"normal" or "inverted".
11 Connection for voltage supply
12 Monitor holder
13 Covering caps
= ON, = OFF), please observe point 6
= NIGHT, the monitor becomes somewhat darker.
46