LG Tone+ HBS-500 Benutzerhandbuch Seite 7

Multi-connection
Advanced Multipoint
The HBS-500 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets (see the pairing
instructions on page 4).
- Turn off the headset.
- With the power off, press the VOLUME DOWN button and press and hold the
MFB for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
* NOTE: When the HBS-500 is connected to two handsets at the same time
(Multipoint), the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HBS-500 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the MFB for 1 second to switch to an
incoming call.
- To switch between 2 active calls, press the MFB for 1 second.
- To terminate the active call or both calls at once, briefly press the MFB.
- If both handsets are receiving an incoming call, the headset will default to the
primary device.
How to Use
5