Safety Instructions - Siemens AR6201-MX Installationsanleitung

2

Safety instructions

Siemens Building Technologies
Fire Safety & Security Products
The device has to be used only for the purpose designed by the manufacturer.
The operation manual has to be stored available at any time and has to be
handed over to each user.
Unauthorized changes and the use of spare parts and additional devices which
have not been sold or recommended by the manufacturer may cause fire,
electric shocks or injuries. Such measures will lead to exclusion of any liability by
the manufacturer.
The liability-prescriptions of the manufacturer in the issue valid at the time of
purchase are valid for the device. The manufacturer is not legally responsible for
incorrect, unsuitable manual or automatically setting of parameters for a device
or the incorrect application of a device.
Repairs can only be executed by the manufacturer.
Installation-, operation- and maintenance procedures should only be carried out
by qualified personnel.
Before opening the device, the power supply must always be interrupted. Make
sure that the device is without voltage by measuring. CAUTION! The fading of
an operation control (LED) is no indicator for an interrupted power supply or the
device being without voltage!
Works at the device and its installation have to be executed according to the
national legal requirements and local prescriptions.
When working on devices the valid safety regulations must be observed.
Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields
you should keep a minimum distance of 25 cm between the device and your
cardiac pacemaker and not stay in an immediate proximity of the device
respective the antenna for some time.
Safety instructions
5
05.2005