Camille Bauer SINEAX A 210 Betriebsanleitung Seite 27

Examples
Example 1: Programming the system configuration
(3-line, unbalanced load)
1. Press
P
2. Press
3. Press
P
4. Press
5. Press
P
Display stops flashing
6. Press
P
Mod-Tronic Instruments Limited Tel: 1 800 794-5883 Fax: 1 800 830-7122 www.mod-tronic.com
> 2 s
(present setting is displayed)
(alterable parameter flashes)
/ to select desired setting
(takes over new setting).
> 2 s to return to display level
Example 2: Programming voltage transformer ratio and
synchronization interval
1. Press > 2 s
P
2. Press (transformer ratio menu)
P
3. Press (present setting of primary voltage)
4. Press (leftmost digit flashes)
P
5. Press / until desired number appears
6. Press (middle digit flashes)
P
7. Press / until desired number appears
8. Press (rightmost digit flashes)
P
9. Press / until desired number appears
10. Press (decimal point flashes)
P
11. Press / until the decimal point is on the
desired position and the kilo/Mega display is
correct
12. Press (takes over new value).
P
The display stops flashing
27