Explanation Of Functions/Terms Used - Selve i-R Wall Send Bedienungsanleitung

GB

Explanation of functions/terms used

Explanation of functions/terms used
Manual/automatic sliding switch
In the 'Man' sliding switch setting, only manual command controls
are carried out (e. g.: UP, STOP, DOWN by pressing the relevant
buttons).
In the 'Auto' sliding switch setting, automatic command controls
are carried out (e. g. shade function, twilight function, time, astro
function ...).
Transmission control light
A radio signal is indicated by the transmission control light being
lit.
Pressing and holding the UP, DOWN, STOP or the PROG button
on the transmitter for a few seconds will cause the transmission
control light to go out briefly after 3, 6 and 9 seconds. This function
serves as a counting aid. After 12 seconds the transmission
control light will go out entirely.
If the battery starts running out, the transmission control light
flashes during transmission.
The transmitter power and/or radio range is reduced when the
battery is running low. If the transmission control light is
no longer lit when the button is pressed, the batteries must be
changed.
Group control
Group control means controlling one or several receivers at
the same time. The selected group is activated using a single
command.
When the i-R Wall Send is operated, the group is controlled by
means of one radio channel.
24