Transport And Storage - In Shape 17414 Gebrauchsanweisung

If the belt slips
If the belt is too loose, it may slip on
the rollers or it may stop when a person
steps on it. Turn both adjustment screws
clockwise to tighten the belt. You should
only turn the screws half a revolution at a
time.
Do not tighten the screws too much, as this
may damage the treadmill.

Transport and storage

You can fold the treadmill up so that it takes
up less space and is easy to move.
Please note that the treadmill is very heavy!
Use the correct lifting technique when
handling the treadmill.
Folding
Hold the rear of the treadmill with one
hand and lift the horizontal section of the
treadmill up until the cylinder (A) engages
in the locked position.
You can now move the treadmill by tilting it
and moving it on the built-in wheels.
Unfolding
Take fi rm hold of the rear of the treadmill
with one hand.
Gently push the cylinder (A) with your foot
so that it is released.
Slowly lower the horizontal part of the
treadmill. Be careful not to trap your fi ngers
under the treadmill!
DK
NO
SE
FI
GB
DE
ET
39