Main Components - In Shape 17414 Gebrauchsanweisung

Raise the upright frame and secure it in
this position using the screws and washers
provided.
GB
Tilt the control panel up and secure it in this
position using the screws provided.
Screw the coverplates securely to each side
of the frame using the screws provided.
The treadmill is now assembled and ready
for use.
36
3
2 1
4
bm
5
6

Main components

1. Pulse sensor
2. Dead man's switch
3. Computer
4. Upright frame
5. Coverplate
6. Wheels
7. Damper
8. Adjustment screws
9. Belt
10. Frame
11. Motor cover
Functional check before use
Before the treadmill is connected to the
power, you must check that the belt can
move unhindered and without noise on the
rollers.
Connect the dead man's switch (2) to the
computer (3).
Plug the treadmill in so it goes into standby.
Press the Start button. After 3 seconds, the
belt will start to move at 1 km/h.
bl
9
8
7