Technical Speciications; Installation Type; Environment And Recycling - AEG EWH 10 mini Gebrauchs- Und Montageanweisung

For the fitter
2.6 Technical specifications
Type
Rated voltage,
power consumption
Nominal capacity
Power consumption
in stand-by mode
Drawable quantity of
mixed water
at 40 °C *
Weight (empty)
Degree of protection
Mark of conformity
* approx. 10 °C Water inlet temperature, approx. 80°C Cylinder temperature
Tab. 1
2.7

Installation type 2

1 Safety valve
2 Non-return valve
3 Pressure test connection
4 Stop valve
5 Pressure reducer
6 Drawing points
3. Guarantee
For guarantees please refer to the respective terms and conditions of supply for your country.
The installation, electrical connection and first operation of this appliance should be carried out by a
qualified installer.
The company does not accept liability for failure of any goods supplied which accordance with the
manufacturer's instructions.
3.1

Environment and recycling

Recycling of obselete appliances
Appliances with this label must not be disposed off with the general waste. They must be coll-
ected separately and disposed off according to local regulations.
10
EWH 10 mini / mini N
EWH 10 mini U / mini U N
W
Litres 10
Below-basin Above-basin
EWH mini U/N EWH mini /N
kWh/d
0.88
Litres 17.8
kg 8
6
EWH 15 mini / mini N
EWH 15 mini U / mini U N
1/N/PE ~ 230V
2000
15
Below-basin
EWH mini U/N
0.41 1.04
18.6 25.6
9
Splash-proof (IP 24)
See rating plate
1 2 3 4
Above-basin
EWH mini /N
0.67
26.1
5