Phottix TR-90 Benutzerhandbuch Seite 12

Timed Photography
Setting the Timer
To ensure correct operation, choose an
interval at least one second longer than
the exposure time. When using autofocus,
set the delay to two seconds or more and
choose an interval at least two seconds
longer than the exposure time to ensure
that the camera has time to focus. When
using long exposure noise reduc tion
(available with some digital cameras),
the interval should be at least twice the
exposure time.
12
Intervals of 00:00:00 will automatically be
reset to 00:00:01 when the SET button (
is pressed to put settings into effect.
To set the number of shots to
select 1 and press the selector button (
down or select 399 and press the selector
button up.
2.3 After adjusting all settings as desired,
press the SET button ( ) to put the new
settings into effect. A beep will sound (if the
speaker is on) and the "SET" indicator will
go out.
)
(unlimited),
)
The new settings will remain in effect until
changed or until the batteries are removed
or exhausted.
3. Start the Timer
Press the TIMER START/STOP button(
The timer will start and "TIMER ACTIVE"
( ) will flash in the display panel. Between
shots, the display panel will show the time
remaining until the next photograph is
).