Chapter 4 Care And Maintenance; Taking Care Of The Autoloader Unit; Safety Considerations; Avoiding Damage - Sony AIT Autoloader Unit TSL-SA300C Bedienungsanleitung

Chapter 4 Care and Maintenance

Taking Care of the Autoloader Unit

Safety Considerations

Power
Power Cable Precautions
Other

Avoiding Damage

Avoid shock and vibration
Environmental considerations
Proper ventilation
24
Chapter 4 Care and Maintenance
• Be sure to use only 100-120 V/200-240 V AC.
• Avoid plugging into the same outlet as high-current equipment like copiers
or shredders.
• Do not crush the cable or place heavy items on it. If the cable insulation
appears worn or broken, do not use the cable.
• Always unplug the cable by holding the plug: never pull the cable itself, as
it will break.
• If the unit is not being used for a long time, unplug the cable from the
outlet.
• Once a year, please clean the power plug.
• When the magazine is not installed, avoid putting fingers in the magazine
insertion slot.
Intense shock, such as from dropping the unit, will damage it.
Do not store or use the unit in locations subject to:
• high humidity
• excessive dust
• high temperature
• intense vibration
• direct sunlight
• sudden changes in temperature
To avoid overheating, install the unit where it will have free air circulation
around the case, and do not cover it during operation. The unit can
malfunction if the internal temperature rises too high.