Quick Start - MACHEREY-NAGEL QUANTOFIX Relax Handbuch

Manual QUANTOFIX Relax
®
4. Quickstart
To start measurements right away, unpack the instrument and place it on a level,
hard surface. Connect the power pack and turn on the instrument using the on/
off switch (Pic. 4 (8)). Once the instrument has performed a self-test, the start
display appears.
Pressing , you can choose the parameter to be measured. Once a param-
eter has been activated, use the test strip as described in the instructions. Then
place the strip on the measurement slide. The instrument recognizes the test
strip and starts the measurement automatically. A progress bar in the display
shows the remaining reaction time. The result is displayed right after the mea-
surement has been completed.
59
MN Manual QUANTOFIX Relax EN V 1.10 / 01.14
®