Grundfos R100 Bedienungsanleitung Seite 9

If "US English" is selected, the units of
the displayed data will change as fol-
lows:
• Flow Q [m³/h] changes to
Q [US gpm].
• Head H [m] changes to H [ft].
• Temperature t [°C] changes to t [°F].
• Specific energy consumption
[Wh/m³] changes to [Wh/kgal].
[Real-time setting]
In this display, the actual time (HH MM)
and date (DD MM YY) can be set. Like
[Name and address], this setting is only
of importance for the function [Print]
where the information will appear in the
printed status report.
1. Press [+] or [−] to start the setting
procedure.
The cursor under the first setting
field will flash.
2. Move the cursor to the setting field
to be changed by pressing [<] or
[>].
3. Press [+] or [−] to change the value.
4. Press [OK] to accept the new
value.
If [<] or [>] is pressed before the
changed value has been accepted
by pressing [OK], the value will not
be changed.
5. Leave the display by pressing [<] or
[>] repeatedly until none of the set-
ting fields are flashing.
Then it is possible to move forwards and
backwards by means of [∨] and [∧].
7