7 Analog pedal set
8 Pedal cable
9 Pedal connector
10 Table clamp
INSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (11) in the table clamp (10) and then screw the clamping unit into the hole on
the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk
damaging the clamping unit and/or the table.
Connecting the pedal set
1. Connect the pedal connector (8) to the pedal receptor (9).
11 Clamp screw
12 GAMEPORT connector (for PlayStation2)
13 USB connector (for PC)
2/8