Introduction; Intended Use; Product Features - PEAKnx PNX-002-A18-00017 Montage Und Inbetriebnahme

1. Introduction

This manual contains basic aspects of the installation and start-up of the Controlmini.
As the instructions assume the user to know basic concepts of the KNX installation, it is
specifically aimed at system integrators.

1.1 Intended Use

■
The Controlmini (short: Panel) can be connected directly to the KNX network and -
using compatible software - perform display and control functions of a Smart Home.
■
The visualization software YOUVI, which is included in the delivery, is used to control
KNX devices such as sockets, lights, dimmers, RGB lights, radiators, blinds or shutters.
■
The installation is possible flush-mounted, or surface mounted indoors.
These instructions are a part of the product and must remain with the end customer.

1.2 Product Features

■
LED Backlit full color TFT display, 1920 x 1080 pixels
■
Touchscreen, projected capacitive (PCAP)
■
Integrated speakers and microphone
■
Integrated camera
■
Fieldbus connection for KNX
■
100 Mbit-Ethernet connection, suitable standard for cabling: Cat-5 or better
■
Operating system: Windows 10 IoT Enterprise, 64-Bit
■
No fan, thus silent
■
24 V DC supply; 2,5 A
■
Maximum power consumption under full load: 15 W
■
Power consumption, no load: 10 W, Server operation without LCD: 5W
■
Ambient temperature 0 to 35 °C
■
flush-mounted or surface-mounted wall installation, parallel to the wall
■
Protection class IP20
EN Controlmini, Installation and Start-up Instructions
www.peaknx.com
27