Technical Support - PEAKnx PNX-002-A18-00017 Montage Und Inbetriebnahme

■
In "Select objects to restore", navigate to the "Disk/Partition" tab and select the "Basic
GPT Hard Disk 0".
■
In "Select the target where to restore to" select the "Basic GPT Hard Disk 0".
■
The following message appears: "Partitions are going to be deleted". Confirm and
continue. In "Please review the changes" confirm.
■
In the next window, select "Restore Now" and "Finish".
■
Close the window after the restore.
■
Select the On/Off icon in the upper right corner of the screen and select "Shut Down".
■
Remove the Recovery USB Flash Drive.
■
Restart the panel.

5.3 Technical Support

If you experience problems with your Controlmini, please contact our PEAKnx Support
Team:
■
Mail: support@peaknx.com
■
Tel.: +49-6151-279 1825
EN Controlmini, Installation and Start-up Instructions
www.peaknx.com
35