Releasing The Limiters; Resetting The Limiters - Panasonic AW-HE50HE Bedienungsanleitung

Setting/releasing the limiters
w Releasing the limiters
w
The limiter positions that are set can be released by
following the steps below.
When the position is released, the tally lamp blinks twice.
1
Press one of the [CAM1] to [CAM4] buttons to
select the unit.
2
Release the limiters by taking the steps below.
w p Releasing the upper limit position of the
movement range
Perform the steps in "Basic limiter operations".
(Press the [MENU] button quickly and then press
the [] button for 2 seconds while holding down the
[PRESET] button.)
w p Releasing the lower limit position of the
movement range
Perform the steps in "Basic limiter operations".
(Press the [MENU] button quickly and then press
the [] button for 2 seconds while holding down the
[PRESET] button.)
w p Releasing the left‑most limit position of the
movement range
Perform the steps in "Basic limiter operations".
(Press the [MENU] button quickly and then press
the [] button for 2 seconds while holding down the
[PRESET] button.)
w p Releasing the right‑most limit position of the
movement range
Perform the steps in "Basic limiter operations".
(Press the [MENU] button quickly and then press
the [] button for 2 seconds while holding down the
[PRESET] button.)
w Resetting the limiters
w
To reset the limiters, the currently established settings must
be released.
The limiter positions that are set can be reset by following
the steps below.
1
Release the settings of the limiter positions to
be reset by following the steps in "Releasing
the limiters".
2
Set the limiter positions by following the steps
in "Setting the limiters".
81 (E)