Genlock Screen (Aw-He50S Only); Output Screen - Panasonic AW-HE50HE Bedienungsanleitung

Setting the menu items
w Genlock screen
w
(AW‑HE50S only)
Ge n l o c k
Hori zo n t a l P h a s e
Subc ar r i e r P h a s e
Coa rs e
Fin e
H Ph as e . S C F i n e S t e p
Retu rn
Horizontal Phase [–206 to +49]
This is used to adjust the horizontal phase during
genlock.
Subcarrier Phase Coarse [0° to 315°]
This is used to adjust coarsely the colour phase during
genlock.
This setting is valid for the VBS signal output.
Subcarrier Phase Fine [–127 to +127]
This is used to adjust finely the colour phase during
genlock.
This setting is valid for the VBS signal output.
H Phase. SC Fine Step [1 to 10]
This is used to select the amount by which the horizontal
phase (Horizontal Phase) is to be adjusted and by
which the colour phase (Subcarrier Phase Fine) is to be
adjusted finely.
Return
Use this to return to the previous menu.
w Output screen
w
0
9 0 °
0
1
Format [1080i, 720p, 576i]
The video format is changed on this screen.
For details on how to change the format, refer to
"Changing the format" (page 44).
Down CONV. Mode
[Squeeze, SideCut, LetterBox]
The down‑conversion mode is selected here.
Squeeze
SideCut
LetterBox
w p When output is selected for the colour bar, the mode is
fixed to Squeeze.
If "SideCut" or "LetterBox" has been selected, the HDMI
output will not appear for a few seconds when the color
bar display is set to ON or OFF.
42 (E)
O u t p u t
F o r ma t 1 0 8 0 i
D o w n C O N V . M o d e S q u e e z e
H D M I C o l o r Y C b C r 4 2 2
R e t ur n
When the 4:3 aspect ratio has been
set for the monitor screen, t
are squeezed horizontally and extended
vertically changing the view of the angle.
With the vertical height serving as the
reference, the parts which extend beyond
this at the two sides are cropped changing
the view of the angle.
With the horizontal width serving as the
reference, black bands are added at the top
and bottom changing the view of the angle.
he images