Control Exercised From The Remote Camera Controller Aw-Rp50 - Panasonic AW-HE50HE Bedienungsanleitung

Basic operations
w Control exercised from the Remote Camera Controller AW‑RP50
w
POWER
MENU
STORE
IRIS
TELE
ZOOM
q Procedure for camera menu operation (AW‑RP50)
w
1
Press one of the [CAMERA STATUS/
SELECTION] buttons to select the unit which
is to be operated.
2
Press the [CAMERA OSD] button of the
AW‑RP50 for 2 seconds.
The camera menu of the AW‑HE50 is displayed on the
monitor.
3
Turn the F1 dial to select the AW‑HE50 menu
item or change the data.
Turn the F1 dial to move the cursor up or down or
change the setting.
Press it to move to the menu at the next lower
hierarchical level or change a blinking setting at the very
bottom hierarchical level.
ALARM
1 2 3
PAGE GAIN/PED R/B GAIN R/B PED
6 7 8
DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2 3
AUTO
CAMERA STATUS / SELECTION
AUTO
WIDE FOCUS/PUSH OAF
For selecting the cameras to be operated.
F1
F2
F1 CAMERA
OSD
4 5
AWB/ABB SHUTTER F2 EXIT
9 10
SETUP SYSTEM USER1 USER2
4 5
PT ACTIVE
LOW HI
PTZ/FOCUS SPEED
4
Press the [CAMERA OSD] button for 2 seconds
to exit the camera menu.
36 (E)
For operating the camera menus.
CAMERA OSD:
When this is pressed for
2 seconds, the selected camera
menu is displayed, overlapping
the camera output image.
When it is pressed for
2 seconds while a camera
menu is displayed, the menu is
cleared.
F1: Turn F1 to move the cursor up
or down on the camera menu or
change the setting.
Press it when moving to
the menu at the next lower
hierarchical level or changing
a setting at the very bottom
hierarchical level.