How To Use The Blade Shield - Klarstein 10032089 Hinweise

HOW TO USE THE BLADE SHIELD

The blade shield is suitable for making risotto.
1 Install the blade and blade shield on the bowl.
2 Put the food in the bowl.
3 Then cover the bowl lid.
4 Turn the bowl lid until it is locked in position. And put the measuring cup on the bowl
lid.
5 Plug in and press "On/Off" button.
6 Set the time, the speed (1-4) and temperature you need. Press "Start/Stop" button,
the appliance starts to working and the timer is counting down. If you skip the timer
setting, the timer is counting.
7 Sound "Beep" will be heard while the working time is left 5 seconds.
8 When the time is up, the appliance stops running and "Start/Stop" button light
keeps flashing. "Start/Stop" button light will be out if you don't perform any
operation in 5 seconds. All the settings are cleared.
9 After use, turn the main appliance off. Remove the bowl lid.
10 Take out the processed food.
Note: Only switch on after the blade shield has been positioned into place. Don't
add ingredients that might damage or block the blade cover when the blade is in
motion and the blade shield is fitted.
EN
35