Adaptation Of The Seat Shell To The Patient; Adjustment Of Width Of Seat; Adjustment Of Depth Of Seat - Interco Magicline Bedienungsanleitung

Scope of supply
Seat and back unit made of aluminium, powder-coated in high-gloss silver,

including physiological turning points� Including continuous regulation of
depth and height of seat via longitudinal holes, variably adjustable back-
rest, adjustment of rear angle via gas pressure spring, height or width
adjustable trunk guiding pressure pads, trapezoidal adapter for the fasten-
ing of the seat unit for underframes including trapezoidal adapter mount�
Cover made of high-quality upholstery cloth „Black Malo CS"�

The design of the seat shell including original accessories is designed for and
adapted to the patient's individual needs� In case of alterations to the fit, clinical
picture or the like further adaptations may only be performed by the competent
specialized company� General alterations as to form, upholstery, technique or
the like may not be performed without the manufacturer's consent; otherwise
such alterations will result in a loss of guarantee�
5.

Adaptation of the seat shell to the patient

Attention: Alterations as to fit, clinical picture or the like may only be performed
by the competent specialized company!
5.1 Adjustment of width of seat
Loosen the four setscrews for the adjust-
ment of the seat width on the lower side of
the seat shell by means of a hexagon socket
screw key such that the connection can be
moved (Photo 1)� Also loosen the setscrews
on the back of the seat shell (Photo 2), two
pieces each at the bottom on each side (3)�
Then you can set the width of seat to the
dimension desired� Following that, tighten
the screws again� Upon completion of the
setting works check all connections for firm
fit again�
5.2 Adjustment of depth of seat
Loosen the setscrews for the adjustment of
depth of seat at the bottom of the seat shell
by means of a hexagon socket screw key
26
ADAPTATION OF THE SEAT SHELL TO THE PATIENT
1
2