Toggling The Status Leds On/Off - Silvercrest SCW 5 A1 Bedienungsanleitung Und Serviceinformationen

Toggling the status LEDs on/off

This menu allows you to enable or disable the camcorder's status LEDs. Proceed as follows:

Press the On/Off/Mode button [2] multiple times to select the MORE menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the LED menu is highlighted. Press
the record button [9] to open the LED menu.

Press the On/Off/Mode button [2] to select an option. The following settings are
available: "ON" and "OFF".

Press the record button [9] to confirm your selection.

To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
The status LED [6] will flash orange during battery charging even if the
status LEDs have been switched off.
Selecting "ON" will enable the camcorder's
status LEDs and selecting "OFF" will disable
them.
SilverCrest SCW 5 A1
English - 117