Buttons; Leds - Silvercrest SCW 5 A1 Bedienungsanleitung Und Serviceinformationen

Buttons

Button
On/Off/Mode button [2]
Record button [9]

LEDs

The status LEDs can be found on the top, bottom, front and back panels of the camcorder.
They allow you to monitor the camcorder status under the most different mounting scenarios.
LED
Status LED [3]
Status LED
[3, 11 and 15]
Status LED [6]
Function
 Press and hold this button for at least 3 seconds to
switch the camcorder on or off.
 Press this button several times while the camcorder is
switched on to toggle between the different operating
modes (Video, Photo, WiFi, Burst, Time-lapse, Self-
timer and Menu).
 Press this button while the menu is shown to navigate
through the menu items.
 Press this button in Video mode to start or stop
recording.
 Press this button in Photo mode to take a picture.
 Press this button while the menu is shown to select a
menu item.
Colour
Green
Slowly flashing green
Fast flashing green
Flashing red
Flashing green/orange
or red
Flashing orange
Off
Description
Operation: Powering on or photo capture.
Operation: WiFi is enabled
USB Mode: Camcorder powered on
Operation: Video recording in progress
Operation: Self-timer enabled
Operation: Recording video or self-timer
enabled
USB Mode: Charging battery
USB Mode: Battery is fully charged
SilverCrest SCW 5 A1
English - 97