Inhaltsverzeichnis
Werbung
PACKLISTE
Überprüfen Sie anhand der folgenden Liste, ob alle zum Rührer
gehörenden Elemente geliefert wurden. Den Transportbehälter und das
Verpackungsmaterial erst entsorgen, nachdem alle Teile erfasst wurden. Es
wird
empfohlen,
die
Original-Packmaterialien
Lagerungszwecke aufzubewahren.
G
CompactDigitalJ BDC2002 Rührer mit Spannfutter
G
Netzteil mit Kabel, 115 Volt
G
Netzteil mit Kabel, 220 Volt
G
Ständer (mit Sechskantsteckschlüssel, Federscheibe und
Schlüssel)
G
Spannfutter
G
Bedienungsanleitung
53
für
Transport-
und
oder
oder
Clockwise Stirring
Turn the stirrer on by pressing the power button. The display will read 40
rpm and the speed indicator light will be illuminated. Increase to the de-
sired speed and press the start/pause button. The stirrer will start turning
in a clockwise direction. The speed indicator light in the display will flash
and the set speed in rpm will be displayed.
Counter Clockwise Stirring
Set up by following the clockwise stirring instructions above. Press the re-
verse button. The reverse button can be pressed while the stirrer is run-
ning to start the stirrer in a counter clockwise direction. The indicator light
above the reversing icon will be illuminated when the stirrer is turning in a
counter clockwise direction.
Countdown Timer
Turn the stirrer on by pressing the power button. Set the desired speed by
pressing the "+" button. Press the multifunction button until the indicator
light for time is illuminated. A "0" will appear in the display. Press the "+" to
set the countdown timer in minutes. Press the start/pause button to start.
Stirring will start. Time or speed can be displayed. If time is selected, the
minutes remaining are displayed. Press the multifunction button to display
speed. To stir in the opposite direction, press the reverse button. Stirring
stops when time is completed. Three beeps will sound.
xRx Agitation Cycle
Turn the stirrer on by pressing the power button. Set speed as above and
countdown timer if desired. Press the multifunction button once more until
the indicator light for cycle is illuminated. A "0" will appear in the display.
Press the "+" to set the number of seconds the impeller will rotate in one
direction before changing directions. Press the start/pause button.
For example: If set for 5 seconds the stirrer impeller will turn clockwise for
5 seconds at the set speed then stop and change to turn counter clockwise
for 5 seconds. This mixing pattern will continue until the pause button is
pressed or until the time is completed (if set).
The display will show the cycle seconds counting down during each direc-
tion unless speed or the countdown timer is selected.
14
Werbung
Kapitel
Inhaltsverzeichnis
