Important Notes - Clearaudio concept Bedienungsanleitung

User manual / Bedienungsanleitung

4. Important notes

4.1 Adjustment of the tracking force
Never check or adjust the tracking force when there is a record on the platter.
Always remove the record first. The pre-adjusted and recommended tracking for the Clearaudio
concept MM cartridge is 2.4g and for the Clearaudio
4.2 Adjustment of the tonearm height
Since everything on the turntable is pre-assembled and
tested, including tonearm and cartridge, there is usually
no need to change any parameters on the
turntable. If you wish to change the height of your
tonearm please refer to your nearest qualified dealer or
service personnel.
Your dealer can make the height adjustment by
loosening the locking screw on the side of the tonearm
base of your turntable.
Clearaudio assumes no liability for incorrect handling or any damage caused, if non qualified
persons attempt these adjustments.
4.3 Adjustment of the anti-skating
Again, since everything on the turntable is pre-assembled
and tested, including tonearm and cartridge, there is
usually no need to change any of the
parameters.
If you wish to change your cartridge and to adjust the
anti-skating force please refer to your nearest qualified
dealer or service personnel.
Your dealer will find the anti-skating adjuster on the
underside of the turntable.
Clearaudio assumes no liability for incorrect handling or any damage caused if non-qualified
persons attempt the above adjustments.
Made in Germany
concept mc
concept
Pic. 9: Adjustment of the tonearm height
concept
turntable
Pic. 10: Adjustment of the anti-skating
cartridge, 2.2g (+/- 0.2g).
7