Clearaudio concept Bedienungsanleitung Seite 6

User manual / Bedienungsanleitung
5)
As all key parameters have been adjusted at the
Clearaudio factory, all you need to do is to level the
turntable using the level gauge provided.
6)
concept
If your turntable is not in a perfectly level
position, as indicated by the bubble of the level gauge
not being positioned in the centre of the black
circle, you can adjust the turntable's feet by turning
them clockwise or anti-clockwise until you reach a
perfectly level position. You can then lock in the ideal
position of the spikes using the lock screw.
You will only get the best sound from your
turntable if the turntable is in a perfectly level
position.
7)
Connect one end of the external power supply
provided to the socket on the rear of the
turntable and the other end to a live AC outlet.
Then connect the tonearm cable to your phonostage
(red plug = right channel, black plug = left channel).
concept
Your turntable is now fully set up and ready
to play and enjoy.
6
Pic. 6: Levelling the turntable
concept
Pic. 7: Adjustment of the turntable feet
concept
Pic. 8: Power supply of the turntable
© clearaudio electronic GmbH, 2018/08
Lock screw