Inserting And Removing The Battery; Operating; Inserting/Replacing Tools - Westfalia 84 19 77 Bedienungsanleitung

Inserting and Removing the Battery

1. Insert the battery (7) into the battery slot at the
bottom side of the cordless impact, as shown in
the fig. When inserting the battery, make sure it
can be easily placed. Do not use force.
2. Push the battery as far as it will go until the
locking clip audibly snaps in.
3. For removing the battery, press the locking clip
and remove the battery out of the machine.

Operating

 Use the impact wrench for unscrewing of bolts
and nuts. The impact wrench creates a high maximum torque of up to 280 Nm
by means of pulse ("beaten") rotational movements.
 Press the ON/OFF trigger (3) to turn the impact wrench on. Release the trigger
to turn off the unit.
 Use the rotating direction button (2) to reverse the rotating direction of the tool.
 In the middle position the ON/OFF trigger is locked. Set the rotating direction
button to this position when laying down the machine to avoid an unintentional
start-up.
Note: The rotating direction button can only be pressed, when the ON/OFF
trigger has been released.
Inserting/Replacing Tools (Hex Socket)
 The cordless impact wrench features a ½" square drive (1). That means you
can use it with tools that have a ½" square entry.
 Please note! Before changing the tool bit, set the rotating direction button (2)
into the middle position to avoid unintentional start-up.
 Firmly push the desired tool bit onto the square drive, so that it cannot loosen
when working.
 Always use the correct size of socket in order to ensure the right fastening
torque.
Operation
10
Locking Clip