Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Remove the screwdriver and all accessories out of the packag-
ing.
Check all parts for damage in transit and do not use damaged
accessory or a damaged tool. Keep packaging materials out of
reach of children. There is risk of suffocation!
Intended Use
The screwdriver is intended for driving in and loosening screws in
wood, metal, ceramic and plastics.
Charging the Battery
Before using the screwdriver for the first time, fully charge the
1.
Li-Ion battery.
Connect the power supply adaptor (4) to the charging socket
2.
(3) on the screwdriver and plug the power adaptor into a wall
socket. When the charging process starts, the red LED (9)
lights up.
A completely drained battery will take 3 – 5 hours to charge.
During charging, the handle of the screwdriver becomes
warm. This is normal and no reason for concern.
The charging Control LEDs
There are three charging control LEDs (7). If all
three LEDs light up when the button (8) is pressed,
the battery is fully charged. If only the red LED
lights up, the charge has dropped to under a third
of a full charge.
Using
10
Werbung
Inhaltsverzeichnis
