Intended Use; Before First Use; Charging The Battery - Westfalia 84 19 77 Bedienungsanleitung

Intended Use

 The cordless impact wrench with an appropriate tool has been exclusively
designed for loosening screws, bolts and nuts, etc. in the workshop, in
agricultural vehicles, equipment and machinery.
 The intended use also includes an operation following the operating
instructions.
 Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

 Remove the cordless impact wrench and all accessories out of the packaging.
 Check all parts for damage in transit and do not use damaged accessory or a
damaged tool.
 Keep packaging materials out of reach of children. There is risk of suffocation!

Charging the Battery

A new battery will only reach its full performance after several charge/discharge
cycles.
1. Connect the battery charger with
power mains. The power LED (9)
turns on green and indicates that
power is on.
2. Insert the battery into the battery
charger. The charging LED (10)
turns on red and indicates that
the battery is charged. Charging
the battery will take approx. 1 - 2
hours. At the end of the charging
process the power LED (9) turns
on green.
Note: Allow the battery charger to cool down sufficiently after charging.
Operation
9
10
9