Camera Reset; Lens Adjustment - Instar IN-6001HD Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please press the
small reset button at the back of your cam-
era for 15-20 seconds. After that time please
let go of the reset button. After the reset, the
camera will restart, which can take up to 60
seconds, and all data in the camera will be set
back to factory defaults. Therefore, please use
a network cable or WPS to reconnect the cam-
era to your network. For more information on
how to install your camera again, please visit:
http://install.instar.com. Once you connect
the camera to the network, use the INSTAR
Camera Tool to find out the camera's IP ad-
dress and open the camera's WebUI to start
configurating your camera again.

9. Lens Adjustment

The IN-6001HD standard lens has a depth of field (also focus range) that is ad-
justed to a distance of approx. 5-10m. In case your area of interest is out of
focus, you will have to adjust the lens accordingly.
Fig.1 & 2:
Open the WebUI and check the live video. Turn the lens until your area of interest
is in focus. If you turn the lens clock-wise, the plane of focus moves away from
the camera's image sensor, and if you turn it counter-clock-wise, the plane of
focus moves towards it.
Go to http://install.instar.com
Fig. 1
P2P UID: FAP99MR28WYRBN6MSR21
Mac LAN: 10D1DCXXXXXX
SerienNr: 600100001
Reset
Press for 15-20
seconds to reset
DC 5V
Modell Nr: IN-6001HD
100-240VAC / 50-60Hz / 5VDC - 1.5A
Fig. 2
10-EN