Maintenance And Cleaning; Environmental Protection - Kress 800 FME Originalbetriebsanleitung

40974_BA_FME_1603.book Seite 23 Mittwoch, 2. März 2016 5:51 17
Maintenance and Service
6. Maintenance and Service

Maintenance and Cleaning

Before carrying out any work on the
machine, pull the mains plug.
 Always keep the machine and ventilation
slots clean.
 Regularly wipe off the plastic parts which are
accessible from the outside using a cloth
without cleaning agent.
 After each job, blow the dust from the fan.
This will increase your machine's service life.
Replacing brushes
Worn carbon brushes should be replaced by an
authorised customer service organisation.
Service
After heavy use over a long period,
the machine should be taken to a
Kress service location for inspection
and thorough cleaning.
The relevant service centres are listed in the
enclosed appendix "SERVICE" or on the website
www.kress-elektrik.de.
Spare parts / exploded view
Exploded views and spare parts lists are available
on our home-page
http://spareparts.kress-elektrik.de

Environmental Protection

Recycle raw materials instead of dis-
posing them as waste. The machine,
accessories and packaging should
be sorted for environmental-friendly
recycling.
The plastic components are labelled
for categorised recycling.
Only for EC countries.
Do not dispose of electric tools
together with household waste mate-
rial!
In observance of the European Directive 2002/96/EC
for waste electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Warranty
1. This power tool has been carefully tested and has
been subjected to a strict quality control process.
2. We guarantee the free-of-charge repair of faults in
the power tool that arise within 24 months from the
date of purchase at the end user's premises and
which can be attributed to a material or manufactur-
ing defect. In certain countries there are special reg-
ulations concerning the warranty terms. We reserve
the right to repair faulty components or to replace
them. Replaced items become our property.
3. Inappropriate use or handling and opening up the
device by unauthorised repair centres leads to the
warranty becoming void. The warranty does not
cover: mechanical damage due to falls etc., damage
caused by penetration of water or other fluids, cut and
damaged cables, motor damage and mechanical
damage caused by inappropriate overloading, wear
parts e.g. carbon brushes, drill chucks, chuck keys,
worn drilling spindles, motors, mains cables, batter-
ies, saw blades, grinding discs, dust bags, accesso-
ries in general (drill bits, chisels etc.). Details of the
various toll wear parts can be obtained from http://
spareparts.kress-elektrik.de or from one of our serv-
ice centres.
4. The warranty may only be enforced when defects are
reported without undue delay (including shipping
damage). Warranty implementation does not extend
the warranty period.
5. If you need to apply the warranty, send the original
purchase receipt together with the device to us or to
the relevant service centre.
6. The warranty obligations assumed by us shall
exclude any further claims on the part of the buyer, in
particular the right to cancellation of a sale, reduction
and the assertion of damage claims.
7. However, the buyer shall have the right to either a
reduction (in the purchase price) or the cancellation
of the sales agreement should we fail to eliminate any
defects within a reasonable period of time.
8. This does not exclude compensation claims in
accordance with §§ 463, 480 Para. 2, 635 BGB
caused by the failure of assured properties.
The provisions defined in Items 7 and 8 only apply
to the Federal Republic of Germany.
Technical modifications reserved
English 23
EN
FME-EN / 1603