Electricity And Safety; Characteristics; Machine Construction; Saw Head - Rodia 405TS Bedienungsanleitung

GB

4. ELECTRICITY AND SAFETY

ATTENTION!
On construction sites electrical appliances
should be connected to specially designed
power supplies. Suitable are grounded
main power supplies equipped with an
earthleak switch of max. 30 mA or sepa-
rating transformers. Non-grounded com-
mon household or similar power outlets are
not suited as a power source.
For water cooled sawing machines stricter
safety standards are applicable. Therefore,
for extra safety the machine must be con-
nected according to one of the following
methods:
• Main power supply equipped with
earthleak switch 30 mA
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• Separating transformer, only 1 machine
may be connected at any given time
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• With an intermediate cable equipped
with a PRCD safety switch of max.
30 mA.
RODIA ® 405TS-406TS
12

5. CHARACTERISTICS

Machine construction

The stainless steel construction contributes
to a stable, rigid and durable sawing
machine. The 4 detachable legs are to be
installed in the leg sockets at the underside
of the water container and fastened with
the knobs .

Saw head

The saw head is constructed of welded
steel components. The height adjustment
of the saw head is kept in balance by a
spring.

Saw cover

The saw cover is a welded steel plate
cap, simple to remove and install for
changing the saw blade by unscrewing 2
knobs .

Saw spindle

The motor flange is mounted on the saw
spindle. The saw flange is to be mounted
on the saw spindle with a hexagon nut
to clamp the saw blade. (Attention: Left-
handed screw thread)

Saw table

The saw table is constructed of welded
stainless steel components, equipped with
anti-slip rubber and adjustable side stop.
The saw table is equipped with 4 ball