Introduction; Safety Regulations - Rodia 405TS Bedienungsanleitung

RODIA

2. INTRODUCTION

This sawing machine is designed and
intended for the professional contractor.
The machine is equipped with a height
adjustable saw head. The movable saw-
ing table has 4 ball bearing guide rollers
for precise and easy cutting feed. Through
continuous supply of cooling water the cut-
ting quality is improved and the wear on
the saw blade is minimized. The cooling
water also absorbs the saw dust.
The quality and construction of this sawing
machine meet the highest standards. The
design is based on longevity and minimal
maintenance.

3. SAFETY REGULATIONS

1 The sawing machine is only to be used
for sawing sandstone, concrete prod-
ucts and natural stone.
2 Only saw blades advised by the manu-
facturer should be used.
® 405TS-406TS
3 Check the following before starting
• the machine should be positioned on a
• the saw blade must be correctly
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
4 During sawing the material to be cut
5 During sawing with this sawing
6 The safety label on the machine should
7 Besides the above-mentioned safety
• Read the instructions for setting up and
• Check that the power cord is correctly
• Electrical cables may not come in con-
• Damaged saw blades should be
11
sawing:
stable, flat and horizontal base,
mounted, (direction of rotation and
centred correctly)
water.
should not be tilted or moved.
machine the max. sound pressure level
is exceeded .
Because the max. sound pressure
level is exceeded during opera-
tion wearing hearing protection
is mandatory.
Sawing of calcium silicate will
expose quartz dust. For your
safety wear respiritor equipment.
never be removed .
regulations the user should pay atten-
tion to the following items:
using the machine carefully.
connected to the power supply.
tact with water or spray water.
replaced immediately.
GB