Electricity And Safety; Characteristics; Machine Construction; Saw Head - Rodia 4050TS Bedienungsanleitung

GB

4. ELECTRICITY AND SAFETY

ATTENTION!
On construction sites electrical appliances
should be connected to specially designed
power supplies . Suitable are grounded
main power supplies equipped with an
earthleak switch of max . 30mA or separat-
ing transformers . Non-grounded common
household or similar power outlets are not
suited as a power source .
For water cooled sawing machines stricter
safety standards are applicable . Therefore,
for extra safety the machine must be con-
nected according to one of the following
methods:
• Main power supply equipped with
earthleak switch 30 mA .
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• Separating transformer, only 1 machine
may be connected at any given time
- - - - - - - - - - - - - - - or - - - - - - - - - - - - - - -
• With an intermediate cable equipped
with a PRCD safety switch of max .
30mA .
RODIA 4050TS-4060TS
®
1

5. CHARACTERISTICS

Machine.construction
The stainless steel construction contributes
to a stable, rigid and durable sawing
machine . The 4 detachable legs are to be
installed in the leg sockets at the underside
of the water container and fastened with
the knobs .
Saw.head
The saw head is constructed of welded
steel components .
Saw.cover
The saw cover is a welded steel plate
cap, simple to remove and install for
changing the saw blade by unscrewing
 knobs .
Saw.spindle
The motor flange is mounted on the saw
spindle . The saw flange is to be mounted
on the saw spindle with a hexagon nut to
clamp the saw blade .
Saw.table
The saw table is constructed of welded
stainless steel components, equipped with
anti-slip rubber and adjustable side stop .
The saw table is equipped with 4 ball
bearing guide rollers for precise and easy
cutting feed .