4. DESCRIPTION
4.1 Features
Dual DI box/splitter
• Active 2-channel DI box with split mode
• 2 high-impedance signal inputs via combo connectors (XLR/6.3 mm jack)
• 2 low-impedance XLR outputs
• Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs, for connecting
a mixer
• Switchable to split mode (input 1 routes the signal to both outputs)
• Input sensitivity switchable: +20 dB, 0 dB, -30 dB
• Ground-lift switch eliminates signal interference and ground loop problems
• Phase can be switched
• Hi-cut 10 kHz switchable
• Modern convex housing design with rubber corners for safe positioning
• Stackable
• Cables can be routed under the housing
• Operation with 9 V battery (included)
15/19
00052471.DOC, Version 1.0