Omnitronic LH-071 Bedienungsanleitung Seite 17

4 Button POWER ON/OFF
Switches the unit on and off:
• button released: unit is powered off
• button pressed: unit is powered on
5
Button MODE
Selects the operating mode:
• button released: stereo operation
• button pressed: mono operation (input 1 routed to both
outputs)
6 Outputs 1 and 2
Balanced XLR jacks with microphone level for connecting
a mixer.
7
Button HI-CUT
Switches the low-pass filter on and off:
• button released: low-pass filter switched off
• button pressed: low-pass filter switched on
8 Button PHASE
Reverses the phase at the outputs
• button released: phases at the inputs and outputs are
the same
• button pressed: phase at the outputs is changed by
180° compared to the inputs
9 Button GND
Separates the ground connection between the inputs and
outputs
• button released: ground connection established
• button pressed: ground connection separated
17/19 00052471.DOC, Version 1.0