Installation; Installing/Replacing The Lamp - EuroLite TC-250 Bedienungsanleitung

INSTALLATION

Installing/Replacing the lamp

For the installation, you need one of the following lamps:
OMNILUX OSD 90V/250W GY-9.5 2000h 6700K
OSRAM HSD 250/60 90V/250W GY-9.5 2000h
PHILIPS MSD250 90V/250W GY-9.5 2000h
GE CSD250/2 95V/250W GY-9.5 2000h 8500K
OMNILUX OSD 250/2 94V/250W 2000h 8000K
PHILIPS MSD250/2 90V/250W GY-9.5 2000h
SYLVANIA BA250/2 SE D 90V/250W GY-9.5
OSRAM HSD250/80 90/250W GY9.5 3000h 8000K
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp or check the operating hour meter (if available) regularly and replace the lamp in
time.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
No. 89106005
No. 89106010
No. 89106015
No. 89106100
No. 89106105
No. 89106115
No. 89106120
No. 89106210
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
21/54
(8) Power supply
(9) Fuseholder
(10) Housing screws
(11) DIP-switches
(12) Control LED
(13) DMX-Out socket
(14) DMX-In socket
(15) Lamp system
00026486.DOC, Version 1.4