Operation Manual - Sharp PG-A10X-SL Serviceanleitung

Operation Manual

Projector (Front and Top View)
Illuminates red when the
projector is in standby.
When the power is turned
on, this indicator will
For turning the power on or off.
KEYSTONE button
For entering the Keystone
AUTO SYNC button
adjusting images when
connected to a computer.
Remote control
Exhaust vent
Foot release
(on the side of
the projector)
Front adjustment foot
Attaching and removing the lens cap
Press on the two buttons of the lens cap
•
and attach it to the lens, then release the
buttons to lock it in place.
Press on the two buttons of the lens cap
•
and remove it from the lens.
Power indicator
illuminate green.
Power ON/OFF
buttons
Correction mode.
For automatically
sensor
9
PG-A10X
PG-A10X-SL
AN-A10T
Lamp replacement
indicator
Illuminates green indicating
normal function. Replace
the lamp when the indicator
illuminates red.
Temperature warning
indicator
When the internal
temperature rises, this
indicator will illuminate red.
INPUT button
For switching input mode
1, 2 or 3.
Volume buttons
For adjusting the speaker
sound level or the
Keystone Correction.
Zoom knob
Focus ring
Speaker
Foot release
Front adjustment
foot
Air filter/cooling
fan (Intake vent)
(on the bottom of
the projector)