Storing And Transporting The Appliance - ROWENTA RO2341EA Power Space Bedienungsanleitung

USE
1. Assemblage of the parts of
the appliance
• Push the flexible hose (17) securely into the
suction opening (10) until your hear a clicking
sound - fig.1. To remove it, press the button of
the hose connector and pull - fig.2.
• If your vacuum cleaner is equipped with the
telescopic tube* (18) : push the adjustment
knob forward, pull the desired tube length
out then release the button to lock - fig.3a.
Slot in the extension tube* (26) if necessary.
Otherwise, assemble the two tubes* (19),
turning them slightly - fig. 3b.
• Fit the desired accessory to the end of the
tube:
Choose the right accessory
• For rugs and carpets: use the 2-position
nozzle (21) on carpet position (retracted
brush) or the turbobrush* (fibres and animal
hairs).
Instructions regarding the energy label
This is a general purpose vacuum cleaner.
To achieve energy efficiency and the clea-
ning performance category indicated on
carpets, please use the dual position
vacuum head (21), with the brush retracted
( *) .
To achieve energy efficiency and cleaning
performance category indicated on hard
floors with joints and grooves, please
either use :
• the nozzle for smooth floors with grooves*
(20B.a) without the removable brush (b)
• the dual position vacuum head (21), with
the brush retracted (
The data provided relating to the energy
label was established using the measuring
methods defined in the Directives 665/2013
of 3 May 2013 and 666/2013 of 8 July 2013.
• For delicate smooth floorings, such as parquet,
laminated flooring or tiles, it is recommended to
use either :
- the nozzle for smooth floors with grooves*,
with the brush retracted (20B a+b)
- the dual position vacuum head (21), with the
brush extended (
• For corners and areas which are difficult to
reach: use the
convertible into a brush* (23) in the flat tool
attachment position.
• For upholstery and delicate surfaces : use the
*Depending on model: equipment specific to certain models or optional accessories.
*).
*).
slot tool attachment
crevice tool convertible into brush* (23) or
the upholstery nozzle* (22) or the brush
integrated to the nozzle (17).
IMPORTANT Always switch off and unplug
your vacuum cleaner before changing the
accessories.
2. Connecting the cord and
starting the appliance
• Unwind the power cord completely, plug
your vacuum cleaner in - fig. 4 and press the
On/Off pedal (2) - fig.5.
• Set the suction power:
- using the electronic power regulator (3) : turn
the switch on the electronic regulator : to set
the suction power: towards maximum
position for floors and minimum position for
furniture and fragile fabrics - fig. 6.
- with the mechanical power regulator on the
grip: open the slider on the grip to manually
reduce suction power, e.g.: on fragile
surfaces... - fig. 7.
3. Storing and transporting the
appliance
• After use, stop your vacuum cleaner by
pressing the On/Off pedal (2) and unplug it -
fig. 8. Wind the power cord by pressing the
cord winder pedal (4).
• In vertical position, put the telescopic tube*
(18) in its storage under the appliance (1b) -
fig. 9.
• In horizontal position, put the nozzle (21) in
its case at the back of the appliance (1a) - fig.
10.
• Carry your vacuum cleaner easily using its
carry handle (7).
12
EN