Bluetooth Transfer (Optional) - Sagem PHOTO EASY 160 Bedienungsanleitung

Liasse AZUR_GB.book Page 26 Jeudi, 21. avril 2005 4:09 16
B
LUETOOTH TRANSFER
Warning :
If you have started transfer by infrared, you will not be able to transfer photos by
Bluetooth if you have not before hand erased be internal memory by holding the key
down for 3 seconds
C
The adapter of Bluetooth (optional equipment) printer is a fast and effective
solution to pass from a telegraphic connection to a connection without wire.
The adapter transforms the photo printer into a Bluetooth receiver, allowing you
to print photos from devices equipped with Bluetooth technology, such as mobile
phones, PDAs, PCs and the like.
Ensure that all hardware units are powered. Never force installation of connectors
on hardware, as the cable and the connector could be damaged.
Remark : For a list of compatible devices, go to www.sagem.com.
Connect the Bluetooth adaptor (optional equipment) to the USB port (A) of
your photo printer.
Identification among hardware units is automatic.
Attention :
The size of the photo or photos to be transferred to the photo printer must be less than
600 Kbytes. The photo format required is the JPEG format. An error message "Err 75"
will be displayed when the maximum storage capacity is reached.
To transfer new data to the photo printer, you must clear the memory. To do this, press
and hold the key for some time
( )
OPTIONAL
A
.
C
- 26 -