Print Your Photographs; Rapid Printing - Sagem PHOTO EASY 160 Bedienungsanleitung

Liasse AZUR_GB.book Page 14 Jeudi, 21. avril 2005 4:09 16
P
RINT YOUR PHOTOGRAPHS
Your printer is switched on, and you have inserted a memory card.
The timer icon flashes while the printer is loading data. After a few seconds, the
number of photographs found on the memory card is displayed on the screen.
Your photos are printed in four stages. The printer first prints the three colours:
yellow, magenta and cyan in that order, then deposits a protective film on the sheet
of paper, and finally ejects the photo.
Remark : To enable you to handle your photographs under the right conditions, the size of the
sheets of paper is greater than the printed surface and the two lateral edges are pre-cut.
After printing, do not tear these edges abruptly, fold along the dotted line several
times and then gently tear off the edges.
Idea :
The edges can be removed on a number of photos at a time by superimposing them on
each other.
R
APID PRINTING
Select the
or
Remark : If you press and hold the
of ten, which can be useful when dealing with a large number of photos.
Press the key to set the number of copies.
Press the key to select print format.
You may select a predefined format to print the photographs:
• Print your photograph in format 10 x 15 cm full page, no border
• Print your photograph in format 10 x 15 cm with a white border
• Print your photograph in format 10 x 13 cm
• Print 2 photographs per page
number of the photograph
keys.
button, you can advance the photo number in steps
.
- 14 -
required using the
.
.
.