Time Settings And Temperature Calibration - Sundirect Smart1.0 Montageanleitung Und Bedienungsanleitung

5.2 Time settings and temperature calibration

Power on Smart1.0. Press "SET" button for 5 seconds to enter the
settings. The screen on the thermostat will show as below and
the minutes of the timer setting will start to flash.
Modify the settings by pressing "-" and "+" button. Continue by
pressing "SET" to save the settings and to shift to the settings
from one menu to another.
If you would like to leave the settings, press the "POWER" button
to quit.
Menu Description
1 Timer setting- Minutes
2 Timer setting- Hours
3 Weekday settings
4 Temperature calibration (Range: -5℃ to +5℃)
5. Operation instructions