Smart Mode; Smart Mode Program Setting - Sundirect Smart1.0 Montageanleitung Und Bedienungsanleitung

5. Operation instructions

5.5 Smart mode

5.5.1 Entering Smart mode
To enter Smart mode power on the thermostat, press "PRG"
button until the "PRG" sign shows on the thermostat. Now the
thermostat will operate in Smart mode. Adjust the desired
temperature by pressing "-" and "+", i.e you are adjusting the
temperature setting of this current time zone for once. If you
would like to permanently modify the setting, please follow the
next paragraph (5.5.2 Smart mode program setting).

5.5.2 Smart mode program setting

a.) Long press "PRG" to start the program setting. You will see the
number (01) starting to flash. The numbers 01 and 02 refer to two
different program setting as follows:
01: Simple program setting- 5+2(weekdays and weekend)
02: Precise program setting- 7days each day individual setting.