Auping Ultimate Climate Type 783RC Gebrauchsanweisung Seite 42

5.3.4 Interim deviation from the
program
While the program of the Ultimate
Climate Advanced is activated it will
always determine at what time and
at which level the heating and drying
process switches on and off. You
may however wish to deviate from
these program settings. In that case
you can enter settings manually
while the program continues to
operate in the background. The
manual settings remain valid until the
next time that the mattress is
activated or deactivated
automatically by the program.
Example 1: Changing from
programmed preheating to
manual heating
If you generally go to bed at about
11:00 p.m. you can program the
Ultimate Climate Advanced so that
heating starts at 9:00 p.m.
When you get into bed you can turn
the level lower or to zero by hand.
The heating will continue at this level
until the program switches the
heating off, for example at 8:00 a.m.
the next morning.
GB 14
1695 bw.pdf - pag.40
Example 2: Interrupting
automatic drying
It may occur that you are still lying in
bed when the program starts the
drying process. For example if you
are ill or want to get up later than
regularly.
In that case you can switch the
drying process off by hand by
pressing the drying key. The
program will then skip the drying
process for a day.
The next day the program will start
drying at the programmed time.
Example 3: Adjusting the
program in the case of long-term
absence.
If you are away from home for a
longer period, for example when you
are on holiday, you can switch off
the heating and drying function of
the Ultimate Climate Advanced
temporarily. To do so, set the
starting time for heating and drying
to --:--. The mattress will then not dry
or heat. When you return you can
reset the program.
LET OP !!! Lage resolutie!
February 16, 2006