Assembly - Sage SFP006 Kurzanleitung

EN

Assembly

Before using your food processor for the first time,
remove any packaging material and promotional
labels. Ensure the POWER button is OFF and the
food processor is unplugged.
Position the Processing Bowl onto the Motor Base
and turn the bowl clockwise until the handle locks
to the front.
Before placing the lid onto the Processing Bowl,
choose your spindle and position it over the
Peeler Disc Disc Spindle
coupling in the centre of the Processing Bowl.
Select your disc(s) and place disc(s) over your
spindle. For detailed information on disc assembly
please see next paragraph.
Lid
Place lid onto the Processing Bowl so that the
ALIGN | LOCK graphics on the lid and handle align.
To LOCK the lid, hold the chute and turn clockwise
so that the handle parts align. Locking the lid
correctly will engage the interlocking safety catch
on the handle, and allow the motor to run.
Peeler Disc
The Disc Spindle which comes with your BFP800
Food Processor is required to use with the Peeler
Disc. Position the Disc Spindle over the coupling
in the centre of the Processing Bowl. Then position
the Peeler Disc over the spindle.
The Peeler Disc can be used with your BFP800
Food Processor bowl and your BFP006 Peel & Dice
Food Processor Bowl.
All Attachments of the BFP800 Kitchen Wizz Food
Processor can be used in your BFP006 Peel & Dice
Food Processor Bowl.
5