Assembly - Sage BFP800 Kurzanleitung

ASSEMBLY

BEFORE FIRST USE
Before using your Sage
become familiar with all the parts. Remove all
packaging materials and promotional labels,
being careful when handling the processing
blades and discs as they are very sharp. Wash
the processing bowl, processing lid and other
attachments in warm, soapy water. Rinse and
dry thoroughly. (Refer to cleaning, care and
storage section).
1. Place the motor base on a dry, level work
surface. Place the processing bowl on
to the motor base with the handle in line
with the ALIGN HANDLE graphic on
the motor base.
2. Turn the processing bowl clockwise
until the handle aligns with the
TURN TO LOCK graphic.
The processing bowl should
be securely locked into position.
8
food processor,
®
3. If using a disc, first assemble the disc
spindle onto the bowl drive coupling.
Orientate the disc so that the side you
wish to use is facing upwards. Hold
the disc by the centre plastic moulding
and position the central hole above the
attachment spindle. Push down firmly
until fitted correctly.
(Please note that these discs only fit the
larger processing bowl).
4. For using the processing blades, carefully
grasp either the 4 blade processor, dough
blade or mini processing blade using
the central plastic support and position
it over the bowl drive coupling and push
down until inserted correctly. If using the
mini processing blade, ensure the mini
processing bowl is assembled into the
main bowl first.